Hydraulic Light Duty Tube and Pipe Clamps Size
Hydraulic light duty pipe clamp and tube clamp sizes:
Clamps to DIN 3015 are available in three types
• Part 1 – Standard series
• Part 2 – Heavy series
• Part 3 – Double series
Each series is organized into different group sizes, so that if we take the standard series Group 1 as an example, the same Group 1 size weld plates, cover plates and bolts are used for tube outside size of either 6mm, 6.4mm, 8mm, 9.5mm, 10mm and 12mm.
Techi industrial supply the hydraulic light duty pipe clamp components in green black yellow blue
polypropylene (PP), smooth green polypropylene (PPS), black polyamide (PA), smooth black polyamide (PAS), aluminium (AL).
| Clamp type prefix | DIN 3015 Part 1, 2, or 3 | Build combination | DIN group size and clamp bodyID in mm | Clamp material code | Metallic parts material code |
| The technical specification for this clamp type is DIN 3015, so we use this as our part code prefix. | DIN 3015 has three series – Part 1 – standard series, Part 2 – heavy series, Part 3 – double series. Our example part code above specifies DIN 3015 – Part 2 – ie. heavy series. | Various different build codes can be used to specify which components are used for an assembled clamp. See below for further information. | Whether standard, heavy or double series, the bodypairs are grouped in our tables on the following pages which explain each group with more detail. In the example above 1012 represents group 1 and a 12mm OD 012 (12mm). | We can supply clamp jaws in the following materials… – PP (polypropylene) green or black – PP (polypropylene) smooth inner (polypropylene green) – PA (polyamide) in black – PS (padsymide smooth inner) in black – AL (aluminium) in black smooth inner) in black | The metallic parts are available in – CS (carbon steel) – 304 (304 stainless) – 316 (316 stainless) Clamp assemblies supplied with carbon steel jaws are supplied as follows… – Standard and double – weld plates are unplated and other parts white zinc plated. – Heavy series – all parts are unplated. Other bodymaterials and colours are available – please ask. |
Clamp dimensions are based on outer diameter of tubing or pipe.
Upper top and lower bottom hydraulic light duty pipe clamp
Pipe clamp plates: Steel
Screw bolts: Steel
Diameter range: 1/4″ – 4″(6mm-120mm)
Hydraulic pipe clamp halves material are Polypropylene (Green black yellow blue Color)
Recommended for systems with less than 1500 PSI without dynamic loads.diameters ranging from 6mm to 12mm, but only
the pipe tube clamp halves designed for the specific size of either 6mm, 6.4mm, 8mm, 9.5mm, 10mm and 12mm needs to be changed.
Our clamps are manufactured in accordance with DIN 3015. They are mainly used in systems to secure tubes, pipes, hoses, cables, sensors and other system-critical components. They are used within a wide range of industries including shipbuilding, offshore, mobile hydraulic, paper industry, metal-processing industry, petrochemical, pharmaceutical, nuclear and the chemical industry.